RMU is a device installed at remote location that collects data, compile the data into a format and transmit the data back to a RMU server.
RMU Server is designed to facilitate centralizer monitoring of GSM base Remote Monitoring Unit, customer can easily visualizations the status of each site.
It can customizable user control, meaning customer can create own user level and set access level for each user. Ulimit- ed user can be created and unlimited user can added into each user level.

Feature

• Cloud System Database
• Alert by SMS
• Can up to 20 Analog Input Channel
• Low cost maintenance
• Easy maintenance and calibration
• Easy to install and operate
• Can send Daily and Monthly report by mail for the desire user
• Available in 2 option connection type i) GSM ii) WIFI

 Application Range
LP-20C/Y are applied to equipotential bonding of the low voltage main or distribution boxes in the building, providing protection against the over voltage arising from the lightning strike to power supply or misoperation.

​Main features 

• Convenient wiring, standard connection components.
•  Built-in temperature control and circuit breaking technology, high security
  performance.
•  Green light on indicates normal, off indicates broken, clear and easy distinguish. 
•  Function of lightning count, capable of storage and display of lighting frequency. 
• Display status of normal on and off.
• Totally-enclosed metal shell, good shielding effectiveness, free maintenance.
  Main Technical Date
   

■ FEATURES
● Accuracy ± 0.25%,± 0.5%, F.S.
● Thick film strain gage on ceramic and stainless steel(SUS316)
● Pressure range from -1 to 400 bar
● Response time < 5milli seconds
● Field-rangable supper voltage from 10 to 30 Vdc
● Output DC4~20mA RL(max.)<[(Vs-9V)/0.02A]Ω,up to 750 ohms at 24Vdc ● Protection class NEMA4/IP65

Feature
 Gauge, Absolute, Vacuum Models Available
 Submersible, General Purpose and Wash down Enclosures  High Stability Achieved by CVD Sensing Element
 Current Output with LCD display
The LTE series features stability and accuracy in a variety of enclosure options. The LTE series extends the packaging options via an all welded stainless steel back end for demanding submersible and industrial applications. The LTE feature had proven CVD sensing technology, an ASIC (amplified units), and modular packaging to provide a sensor line that can accommodate specials while not sacrificing high performance.
 

Industrial/ Marine Application
Model: LT

• Gauge, Absolute, Vacuum and Compound Pressure Models Available
• Submersible, General Purpose and Wash down Enclosures • High Stability Achieved by CVD Sensing Element
• Millivolt, Voltage and Current Output Models
The LT series features stability and accuracy in a variety of enclosure options. The LT series extends the packaging options via an all welded stainless steel back end for demanding submersible and industrial applications. The LT feature had proven CVD sensing technology, an ASIC (amplified units), and modular packaging to provide a sensor line that can accommodate specials while not sacrificing high performance.

Industrial/ Marine Application
Model: LT10M

• Gauge, Absolute, Vacuum and Compound Pressure Models Available
• Submersible, General Purpose and Wash down Enclosures • High Stability Achieved by CVD Sensing Element
• Millivolt, Voltage and Current Output Models
The LT series features stability and accuracy in a variety of enclosure options. The LT series extends the packaging options via an all welded stainless steel back end for demanding submersible and industrial applications. The LT feature had proven CVD sensing technology, an ASIC (amplified units), and modular packaging to provide a sensor line that can accommodate specials while not sacrificing high performance.

Industrial & Marine application
Model: FLR­EH

Measuring principle
Conductive measurement resistance from reference point to Switching electrode point

Application
These floaless level switch is design for point level detection is applicable for the following application:‐
‐ For conductive liquid
‐ Float‐less application
‐ Pump control
The probe can be use for vacuum and overpressure condition up to 21 Kg/cm2. The seal material is with stand the operating temperature range of ‐80oC to 200oC.

Feature of benefit
• Easy for setup Commissioning and calibration
• Suitable for most of the liquid application
• No recalibration require when replacing the
 controller

Features :

Low cost, easy to install, high reliability, range adjustable, suitable for every type of liquids, non-mercury contained meets environment requirements, pressure test up to 400KPa AT 20'C, anti-reversed impervious sealing.

These level gauges are particularly suitable for liquids:
- Colorless
- Very Fluid
- Non-corrosive for glasses (e.g. ammoniacal solutions,
trichlorethylene, water steam up to 32bar and higher pressure is upon request etc.)
Bi-colour level gauge will parallel glasses.

Working Principle:
It is a variation of transparent level gauge, however equipped with two reflex glasses and a back illuminator, fitted with suitable coloured fitters. The reading is given by the contrast between the bright colour (usually:red) of fitters in the lower part containing liquid and the colour of upper part of visible window.

The drawing shows a typical Reflex Glass Level Gauge. This instrument consists of a metal body, machined to have an internal chamber and one or more front windows (on one side only of the gauge).

On each window a special high resistance plate reflex glass is fitted with sealing joint and metal cover plates hold by bolts and nuts.

The chamber is connected to vessel with cross fittings and flanged, threaded or welded ends. Usually, between the instrument and its connecting ends, valves are fitted to consent shut-off piping and to disassemble the level gauge without to empty the vessel. Drain valves can also be fitted to cross fittings device.

To avoid leakage in case of glass breakage, safety ball-check device can be provided.

Sight Glasses to DIN 7080

Our delivery programme includes all sizes given the DIN standard and further sizes to provide complete programme. If you cannot find your sight glass here please contact us - we can do a lot

Gauge Glasses to DIN 7081

We manufacture two standard version of gauge glasses : reflex glasses, which allow simple and safe reading to be made at a distance; and transparent glasses, which can also be supplied in a high-pressure version for particularly high requirement. If you cannot find your gauge glass here please contact us - we can do a lot.

Function & Features

• Continuous Monitoring
• Scanning Distance up to 20 Meter
• Continuously recording in percent (%)
• CE Mark by TUV
• Automatic calculation of Smoke Exceed
Limit by Daily & Hourly
• Aid to Efficiency of combustion
• Meet to the department of Environment
Emission standard Regulation

Specification
Control Unit

Model : SDM V9
Screen Width : LCD 70 x 38mm
Power : 85-260 VAC; 50/60 Hz
Power Consumption : 20 Watt
Ambient Temperature : -10 ~ 50°C
Alarm Contact : Max 5A / 240VAC - SPDT Relay
Measuring Range : 0 - 100% (Opacity)
Engineering Unit : Percent Obscuration (%)
Mounting : Panel or Wall
Panel Cut-Out Size : W137 ± 1 x H137 ± 1 x D90 (mm)
Dimension : W150 x H150 x D110 (mm)
Weight  : 1 Kg
Sampling Time : 0.2 seconds
Display Accuracy : ±1.0% F.S
Operating Temperature : 0°C to 55°C
Operating Humidity : 20 to 80% RH Max. (Non-condensing)
Protection : IP65 Front Panel
TUV Certification No. :  AE50177232 001
Report No. : 17014563 001
Conformity : 2004 / 108 / EC
Emission : EN 50270 : 2006                                            EN61000-3-2 : 2006                                       EN61000-3-3 : 1955+A1+A2

Unit Overview

1. LCD display
2. Five Touch Pad Navigation Key 3. Power Supply Terminal (L,N,E) 4. Alarm Terminal (TB1-6)
5. Sensor Input Terminal (TB9-12)
6. Output Terminal 4-20mA(TB13-16) 7. RS485 Modbus (TB17-18)
8. RS232 Terminal
9. USB Interface Port