Company Profile
"Your Patner in Material Handling System" is and has always been our Motto. We value our customers, we care for our customers and we have always considered our customers as our partner as we provide them with the most reliable crane, hoist and goodshoist in the market to ensure their success. Your satisfaction is our pleasure.
Nippon Hoist
Nippon Hoist has been in the International Market for over 50 years and they have been in the Malaysian Market since 1981. Nippon Handling System (M) Sdn Bhd has been appointed by Nippon Hoist Co, Limited as the sole distributor in Malyasia since 1991.
Factory Location
Since its inception thousands of Nippon hoists and goodshoists have been installed throughout the country. We are also a licensed manufacturer of nippon cranes. Our factory is located at Lot No 6, Jalan 33/8, Seksyen 33, 40400 Shah Alam, Selangor, Malaysia.NHS
In line with the group restructuring exercise in 2001, NHS Engineering Services Sdn. Bhd. has taken over the entire activities of NHS such as design, manufacture, testing, commissioning and after sales services for all types of material handling equipment.1) HIGH PRECISION STEEL FABRICATION
With sound engineering knowledge and training by our Japanese counterpart, NHS is able to design and fabricate any steel structure which required high precision and accuracy. Since its incorporation in 1991, we have a sound record of successfully completed hundreds of projects of various sizes.-
To mention a few of our prestigious project such as 2 units of movable factories for Penang shipyard measuring 20m width x 30m height x 120m length, 4 fully computerized high speed handling system in an aluminium factory and 3 fully automatic handling system for a Japanese copper foil manufacturer in Shah Alam.2) OVERHEAD CRANE
This is a combination of hoist steel girders, end carriages (motorised frame with wheels) and other components. As in a factory, a crane runs on a fixed length of steel on top of each adjacent side of the factory. The purpose is for the lifting or transportation of goods or loads within the factory floor area as determined by the length of the steel beams.-
Cranes can be used within a closed factory area or outdoor and the area of movement is predetermined by the steel structures guiding its movement. In most factory setup, overhead cranes are a necessity with capacity ranges from 3 ton to 50 ton. For the crane to be assembled, we need to import the hoisting units, wheels and electrical controls.-
The rest is the local fabrication of crane girders and end carriages to be fitted on to the imported contents as cranes. The local content fabrication constitutes approximately 45% of the selling price of each crane and with each crane sold.3) CRANE STRUCTURE
This section deals with runway beams, rails and columns. Normally a customer prefers the crane supplier to install the runway beams, rails and columns as a complete package to avoid possible problems relating to rail alignment, levelness and parallelism.-
We are also able to lay foundation works for outdoor gantry cranes and to a certain extend, small factory structures can be designed and built by us.Goods Hoist
- Goodshoist with Expanded Metal Lift Shaft
Goodshoist with Brick Wall Lift Shaft
Collapsible Gate without Shutter
Collapsible Gate with Shutter
Goods-hoist with Speed-Deck Lift shaft
Goods-hoist with Brick Wall Lift Shaft
Collapsible Gate without shutter
Collapsible Gate with Shutter
Goods hoist with Expanded Metal Lift Shaft
Monorail & Travelsing Car
- Monorail
Travelsing Car
Travelsing Car2
Special Project and Crane
We also attend to special projects upon request such as Log Handling Crane, Travelling Saddle for Mobile Factory, 3 Ways Cruise Crane, Any Form of Steel Structures. These special projects required very high standard engineering and with the assistance of Nippon Hoist we are able to manufacture them. These special projects are in accordance with customer’s needs and requirements.
OUR SERVICES:
After sale services is a very important factor in our industry in line with our motto “Your Partner in Material Handling System”.
As such you can be assured of the following services provided at all times:
- 24 hours on call services- Operator training services
- Technical Advice
- Refurbishment/ upgrading works
- Automation upgrading works
- Most importantly genuine parts at all times as we are the sole distributor.
-
Customer with service contract with us are termed as privileged customers as they enjoy special discounts for the purchase of spare parts and they will enjoy priority in terms of after sale service.-
Our members of the service team consist of experienced Engineers & Technicians and ultimate importance is given to the guidelines given by the Jabatan Keselamatan dan Kesihatan Pekerjaan (JKKP). This is to ensure that the goodshoists and hoists and electric overhead travelling cranes are serviced and maintained to be operated safely.
-
Attention should be given to Approval letters by JKKP to the licensed manufacturer whereby one of the clause interalia states that the manufacturer and the owner is responsible for maintenance for its safe operation.-
It further states that the maintenance must be done by person / persons and or firms with the necessary experience and registered with JKKP. Our adherence to this guideline well ensures that your crane is properly maintained and also protects the owner from any prosecution by JKKP for any untoward incidences while using the said crane.