Profile

Welcome to GOLDVENT MARKETING SDN BHD
GOLDVENT MARKETING SDN BHD was established on 1st November 2002, we are an own manufacturing company and our factory are located in Kuala Lumpur,Malaysia. Our products are used in all kinds of industrial applications. Just like Plastic, Rubber, Medical, Scientific, Semiconductor, Food Processing, Timbers, Textile, Garment, Wafer, and etc.
Principle Activity of Company
  • Specialize in solving & demanding heat application problems.
  • Provide technical support when necessary
  • Design, customize, modify & upgrading 
  • Heating Control System and other services
  • Specialize in designing and customize of In-Line Circulation Heaters, Dust Finned Heaters, Sauna Heaters, Industrial Oven, Furnace, Solder
  • Pot, Hot Plate, Heating Control System, Control Panel and other services
  • Pneumatic Control
We are specialize in:-
Heaters
  • Cartridge Heater (Rod Heater)
  • Band Heater
  • Strip Heater
  • Plate Heater
  • Tubular Heater
  • Bobbin Heater
  • Infrared
  • Cast Iron
  • Cable Coil Heater
  • Teflon Coated Heater
  • Titanium Heater
  • Ceramic Band / Ceramic Fibre
  • Seal Nozzle
  • Cast Aluminium Heater
  • Kanthal Element
  • Heater Wire
  • etc..
Thermocouples
  • Type K,J,T,S,R,B,E,N
  • Radiation Temperature Dector (PT 100ohms)
  • Connectors (Male & Female)
  • Transmitter
Immersion Heaters with Control
  • Adjustable range from -73 to 316°C (-100 to 600°F) offers wide field of application . Resolution sensitivity of - 0.1°C (0.1°F) offers close control of process
  • Compact size; lengths under 127 mm (5") and diameters less than 20.6 mm (13.16") fit almost any application
  • Fast response as external metal shell expands or contracts with each temperature change
Omega Hi-Density Cartridge Heaters
  • Hi-Density Cartridge Heaters Provide Maximum Processing Temperature Capability
  • Higher watt densities permit smaller heaters to be used without sacrificing life expectancy. This results in up-front as well as long-term cost savings.
  • Swaged construction provides maximum support for the resistance wire and excellent heat transfer characteristics, improving the overall life expectancy of the cartridge heater.
  • Termination styles and special features allow customization to any application.
  • Applications up to 760°C (1400°F)
Cartridge Heaters
  • Reliable Premium Quality
  • Rugged, Shock and Vibration Resistant
  • U.L. Component Recognized
  • CSA Certified
  • Lengths from 1 1/4" (3cm) to 6" (15cm)
  • 120, VAC and 240 VAC, Models
  • Lengths from 11/4" to 36"120 Vac and 240 Vac Models
Inductive Sensor
  • Cylindrical housing from 4 to 30 mm 
  • Standard and extended sensing distance
  • Flat-pack housing - Stainless steel and Polyester housing
  • Flush / Non flush version
Conductive Level Sensors
  • Compact housing -
  • Adjustable sensitivity by teach-in function
  • User-defined electrode length 
  • Mounting probe head for up to 4 different levels
  • Multiple application operations by means of dip-switch settings
Measurement Transformer
  • 1-Phase AC current transformer 
  • 3-Phase AC current transformer
  • True RMS current transformer 
  • AC transformer with 7 knob selectable ranges
Heaters (Heating Elements)
The Kanthal program of electric heating elements is the widest on the market. Our heating elements outperform in all temperature ranges, from element temperature 50 to 1850°C (120-3360°F), and atmospheres.
Solid State Relays
  • Single phase relays up to 125 amps 
  • 3 phase relays up to 75 amps
  • Digital and analogue inputs (4-20 mA or 0-10 V) 
  • Complete range of SSR's with a built - in heatsink
Digital Panel Meters
  • Wide range of available inputs for all the applications 
  • Basic models, ideal solution for the panel builders
  • Easy programmability
Pneumatic Valves
As the inventor of the pneumatic valve terminal, Festo is an expert for valves. From simple, low-cost applications to complex automation tasks, Festo has the right valve and manifold for every purpose. With the features you expect from Festo: top quality, worldwide delivery and comprehensive engineering support.
Festo Pneumatic
We are engaged in supplying quality range of Festo Products. Our products are procured from reliable vendors of the market who manufacture these at par with industry standards. These are available in variegated specifications to suit different industry application. Owing to their durability, compact design, precision engineering and sturdy construction, these Festo Products are in high demand
Thermocouple Wire and Strip
  • Thermocouple wire and thermocouple strip for use at temperatures up to 1260°C (2300°F). Kanthal thermocouple wire is supplied with bright or oxidized surface according to standard or special EMF requirements.
  • Each individual arm is calibrated against platinum and the EMF values are shown on each coil or spool.
Heaters (Electric Heating Systems)
Kanthal electric heating systems for applications such as aluminium and steel processing deliver significant reductions in energy consumption compared to gas-heated systems. In fact, the net efficiency of Kanthal electric heating systems is 70%, compared with only 20% for gas.
Pneumatic Solenoid Valves
  • Connection G1/8, G1/4, G1/2, G3/4
  • Flow 500 ... 7 500 l/min
  • Voltage 12, 24, 42, 48 V DC, 24, 42, 48, 110, 230, 240 V AC
  • Electrically actuated, piloted
  • Pneumatically actuated
  • Manifold rail (PRS)
  • Manifold strips.
Elevator Controls
  • User-friendly, noise immune and cost-effective 
  • Reduced installation and commissioning time
  • The Master Module interfaces Dupline® to any Elevator Controller with a RS232 or RS485 port.
Brushless Blower Motor
  • Process Heat 
  • Hot-air blower  
  • Integrated heating element and tool protection
  • Integrated code switch for potentiometer (internal / external)
Pneumatic Component
  • Size 4, 6
  • Connection G1/8, G1/4, G3/8, G1/2, G3/4, G1, also available with NPT thread
  • Pressure 0.3 ... 7 bar, 0.5 ... 12 bar
  • Flow rate 800 ... 4800 l/min
  • Pressure gauge with bar, psi, MPa
  • Grade of filtration 40 µm, 5 µm
Digital Panel Meters (Modular Solutions)
  • Easy future expansion 
  • Maximum in-field flexibility
  • Quick assembly and configuration 
  • Modular architecture available in the medium and high-end meters
Hot-Air Blower - Hotwind System
  • Heat output and air volume steplessly adjustable with potentiometer
  • Integrated power electronics
  • Protection against heating element or device overheating
  • Brushless blower motorAlarm output
  • Integrated temperature probeIntegrated temperature control
Heaters (Kanthal Air Heating Cassettes)
With Kanthal air heating cassettes it is possible to heat air or gases up to 800°C (1470°F) and maintain a uniform temperature throughout the furnace. The air heating cassettes can be produced to fit most existing or new furnace designs. Installation is very simple in most cases.
Kanthal Heating Modules
Kanthal prefabricated heating modules are designed for a wide range of thermal processing applications up to 1700°C (3090°F) element temperature. Combining the best properties of electric heating and fiber or dense ceramic insulation, Kanthal heating modules are suitable for the smallest laboratory furnace to the largest production furnace.
Kanthal Resistance Heating Wire and Strip
  • Resistance heating wire and resistance heating strip in iron-chromium-aluminium (FeCrAl) alloys and nickel-chromium (NiCr) alloys for the manufacturing of electric heating elements.
  • Resistance heating alloys based on iron-chromium-aluminium for maximum element temperature of 1425°C (2600 °F). Kanthal and Alkrothal resistance heating alloys are characterized by high resistivity and capabiltity to withstand high surface load.
Heavy Duty Cartridge Heaters
  • C-HD Series
  • Reliable, Premium Quality
  • CSA Certified
  • Lengths from 21/2 to 25"
  • 120 and 240 Vac Models
Finned Strip Heaters
  • Excellent for Use in Air Heating, Air Ovens, and Load Banks
  • Seamless Stainless Steel Sheath
  • Post Terminals
  • Ceramic Element Support
  • Magnesium Oxide Packing
Strip Heaters, Ceramic Heater, Ceramic Strip Heater
The HCS Series stainless steel strip heaters provide clean, dependable heat with sheath temperatures up to 649°C (1200°F) and watt densities up to 40 W per square inch. Because of the seamless stainless steel sheath, these ceramic-insulated strip heaters are dimensionally stable in milled slots.
Surface Spot Heaters
  • Natural Convection Heating Element
  • Compact Design
  • Self Regulating, Highest Power at Low Ambient Temperature
  • Fixing via Flange with 2 Holes for Screw Mounting (Fastener not Provided)
  • Maximum Heater Temperature 170ºC (338ºF)One Wing