Company Profile
HX Thermal Solution Sdn Bhd is committed to offering a high quality service to all industries specialized in plate heat exchangers, the one stop source for all brands of your Plate Heat Exchanger needs. We have built an enviable reputation for the quality of our end product and the excellent relationships based with our prestigious customer base.
Plate Heat Exchanger
The plate heat exchanger consists of a pack of corrugated metal plates with portholes for the passage of the two fluids between which heat transfer will take place. The plate pack is assembled between a frame plate and a pressure plate and compressed by tightening bolts. The plates are fitted with a gasket which seals the channel and directs the fluids into alternate channels.
Plate & Shell Heat exchanger
Vahterus Plate & Shell (PSHE) Heat Exchangers combine the benefits of traditional heat exchangers. Utilising a fully welded plate pack within a strong shell construction makes Vahterus PSHE the most compact, thermally efficient and cost effective heat transfer solution in many applications.
Spiral Heat Exchanger
Repair & Service For Spiral Heat Exchanger
- The crack is localized and accessibility for repair must reachable for welding purpose.
- Windows is being cut to access to the crack channel plate in order to repair by TIG welded.
- Air and water bubble test is carry out at 0.2 bar air pressure with support of 2 steel bars to avoid damaged on the spiral roll.
Corrugate Shell & Tube
The XTUBE Multitube corrugated tube heat exchanges and all stainlee steel units consisting of a number of corrugated tubes within a shell. This exchanger is very suitable for hygienic processes.
Fin-Tube Heat Exchanger
Repair & Service For Fin-Tube Heat Exchanger
- Chemical Circulation
- Manual cleaning with brush
- High pressure jet cleaning
- Plugging of tube
- Repair of Fin Pin
- Re-painting
- Hydraulic Test
- Packing
Shell & Tube Heat Exchanger
Repair & Service For Shell & Tube Heat Exchanger
- Chemical Circulation
- Internal condition
- Tube is pre-clean with brush
- High Pressure Jet Cleaning
- Plugging of tube by welding
- Tube is plugged
- New gasket installed
- Hydraulic Test
Fully Welded Plate Heat Exchanger Block
- Panels dismantled for repair, services and cleaning to restore heat transfer performance
- Crack detected and marked for repair
- Crack localized by dye penentrant check to repair by TIG welding and followed by hydraulic test
Fin-Tube Cooler Heat Exchanger For Cooler Box
Repair & Service For Fin-Tube Heat Exchanger
- Chemical Circulation
- Copper Brush Cleaning
- Fin-Pin repair & Straighten
- High Pressure Jet Cleaning
- Air Filter Cleaning
- Air filter removal
- New gasket installed
- Hydraulic Test
CIP Heat Exchanger
The CIP–procedure itself will however be slight different in different applications and for different fouling types, but generaliz as follow:
- Draining of the Heat Exchanger
- Rinsing with fresh water
- Draining of rinsing water
- Filling with fresh water
- Addition of cleaning agent
- Circulation and heating of cleaning solution
- Draining of cleaning solution
- Rinsing with fresh water
- Draining of rinsing water
